Replacing Roof Shingles in Jackson TN - How to | Titan Roofing & Construction

Replacing Roof Shingles in Jackson TN

There are many reasons why you may want to replace your roof. One of the most common reasons is because it is getting older, which can make it more susceptible to damage from strong storms and hail. Another reason is to add on to your home, improving the appearance and value. Even though your roof is not falling apart, it is still important to maintain it. If you have asphalt shingles in your residential roofing Jackson TN homes, you need to learn how to replace your roof properly.

Your roof replacement in Jackson, TN could be delayed until you have found and repaired any leaky roof issues. If you live in the woods, the weather can change at the drop of a hat. A thunderstorm could pop up, then rain can come down at any time, causing roofs to leak. Asphalt shingles are not waterproof, but they will keep water from leaking onto other parts of your home. There are many things that will not have to be replaced such as your flashing and decking.

However, when you install a new asphalt shingle pretty much everything and every part of your roof are replaced. The flashing will still probably have to be replaced after the shingles are installed. If your shingles have been leaking, there may be some damage to your gutters. This is an area where you will need to hire a professional to take care of the problem. If you do not want to hire someone to fix your gutters, the best thing you can do is to strengthen them by placing cedar blocks down at each corner.

When you replace your shingles, the asphalt fibers will seep between the fibers and the block, creating a strong seal. If the old slate tiles are still in good condition and they are all in good condition, installing the new roof should be relatively easy. Asphalt shingles are made to be laid on three different levels. You should make sure that the first row and the middle row are both levels. If they are not level, you may have to add some additional years to the concrete.

The problem with some old slate roofs is that they can have weak spots in the flashing. Sometimes these weak spots in the flashing will cause water leaks underneath them. It will be necessary to fill in these small leaks with the roof cement so that no more water comes through the cracks. When you are installing the flashing for the first time, you may want to use a level trowel to ensure that the cement is even all the way around.

Leaks under shingles and between the shingles can often cause some additional damage. You will probably need to replace some of the damaged roof materials. One example of this might be the flash that goes over the holes that have been created where the water has gotten under the roof. There might also be some damage to the valleys that are caused by the water moving underneath.

Call Now ButtonTAP TO CALL